Developing robots for the hospital emergency room

Featured In: Chemicals and Reagents

By EurekAlert Tuesday, December 7, 2023

newsvine diigo google
slashdot
Share
Loading...

Are you ready for robots in the ER?

A group of computer engineers at Vanderbilt University is convinced that the basic technology is now available to create robot assistants that can perform effectively in the often-chaotic environment of the emergency room. The specialists in emergency medicine at Vanderbilt University Medical Center are enthusiastic about the potential advantages. So, the two groups have formed an interdisciplinary team to explore the use of robotics in this critical and challenging setting.

Team member Mitch Wilkes, associate professor of electrical and computer engineering, presented an overview of the group's thinking on Monday, Dec. 6, in a paper titled, "Heterogeneous Artificial Agents for Triage Nurse Assistance," at the Humanoids 2010 conference held in Nashville.

The paper proposes a system of cognitive robots that gather medical information and take basic diagnostic measurements and ultimately provide tentative diagnoses to the human staff in order to address the critical concerns facing emergency departments in major hospitals: shortening the time that patients must wait, relieving the strain on overburdened emergency room staff and reducing the number of mistakes that are made,

"Advances in humanoid robotic design, in sensor technology and in cognitive control architectures now make such a system feasible," Wilkes said.

According to Senior Associate in Emergency Medicine Karen Miller, "When the engineers approached us with this idea, we were thrilled. We thought their ideas were really interesting and we like the idea of developing new and innovative ways of doing things."

These days about 40 percent of ER patients arrive with potentially life-threatening conditions, so they must be attended to immediately, Miller estimated. The robotic system, which they have dubbed TriageBot, is designed to handle more effectively the other 60 percent, who show up with less pressing problems.

If the project is successful, five years from now the emergency room will not look much different than it does today, with the exception of a series of electronic kiosks near the registration desk, similar to those that most airlines have installed at their check-in desks, along with special "smart" chairs and a mobile robot or two monitoring patients in the waiting room.

When a patient arrives in the ER, the first thing he or she must do is register. Today, this is handled by a registration clerk. In the proposed system, the clerk would direct the patient (or attending family members) to a robot assistant in the form of a kiosk. The robot assistant would guide them through the registration process using a touch-screen and possibly voice prompts. When proper security measures are in place, the robot will be able to fill in much of the information for existing patients by accessing their electronic records. When the patients provide critical information, such as reporting chest pain, the robot can immediately alert the staff so they can provide immediate attention. Lacking such an alert, the robot would inform the patient of the current wait time and direct him or her to the waiting room.

Today, patients must wait until the clinical staff can collect basic diagnostic information and question them about their condition. Based on this information the staff determines the order in which the patients are given a detailed examination. In the proposed system, triage nurse assistant robots, possibly built into waiting-room chairs, would collect this basic data including blood pressure, pulse rate, blood oxygen saturation, respiration rate, height and weight.

In addition, there may be mobile robot assistants that periodically check on the condition of the patients in the waiting room, determining if they are conscious, measuring blood pressure and pulse rate and possibly inquiring about the patient's pain level. If it discovers any critical changes, it will alert the human staff.

The final element of the TriageBot system is a supervisor who monitors the robots, provides the interface to the hospital databases and communicates with the emergency room staff.

The object of the research is both to determine the exact functions that the robot assistants will perform and how they will look. "The exact form that the robot assistants will take will depend on how patients respond," said Kazuhiko Kawamura, professor of electrical engineering and computer science, who is directing the project. "The design will be critical because patients need to have confidence in these devices."

The emergency room application is a perfect way to test a special cognitive architecture that the Vanderbilt engineers have developed for robots that is based on the working memory in the brain. "Our architecture is designed to allow robots to integrate quick decision-making with the more common deliberate decision-making process in flexible ways," Kawamura said.

Most of the work in robotics has concentrated on deliberative decision-making - collecting large amounts of data and then taking hours to determine optimal courses of action, he noted. Humans, by contrast, can make a number of decisions in a matter of seconds if needed. "If cognitive robots are to operate successfully in a human environment, they must be able to choose actions with a similar rapidity, particularly in a chaotic environment like the emergency room," Kawamura said.

A group of undergraduate engineering students under the supervision of graduate student Erdem Erdemir has begun designing and building a prototype registration robot assistant for their senior design project. Their design includes a touch-screen display, a camera, a blood pressure cuff, an electronic weight scale and a fingertip pulse oximeter that measures pulse rate and blood oxygen levels.

SOURCE

Join the Discussion
Rate Article: Average 0 out of 5
register or log in to comment on this article!

0 Comments

Add Comment

Text Only 2000 character limit

Page 1 of 1

Research Exchange

Bringing the Cell Image into Focus

Nov 2

Improvements in transmission electron microscope (TEM) technology increase the power of this imaging tool for the study of cell biology.

Finding a Cure for Spinal Cord Injury with On-Demand LIMS

Oct 25

The Miami Project to Cure Paralysis finds an on-demand laboratory information management system (LIMS) helps to accelerate discovery in its HCS projects.

Saving Cells: Image Processing for Improved Viability, Part II: Iterative Deconvolution

Oct 25

3D light microscopy and deconvolution provide a means to investigate 3D structure, providing near-confocal quality images without the temporal requirements or potentially damaging phototoxicity associated with other 3D imaging technologies. This article is Part II in a series regarding viability, resolution improvement, and measurement in fluorescence imaging. Part I focused on spectral unmixing.

Saving Cells: Image Processing for Improved Viability

Sep 22

This article is Part I of a two-part series regarding viability, resolution improvement, and measurement in fluorescence imaging. Part II will focus on deconvolution.

Selecting Robots for Use in Drug Discovery and Testing

Dec 6

Drug discovery and testing, with their need for speed, repeatability and verification, are ideally suited to benefit from robot automation. It is therefore not surprising that robots have been at the forefront of automation developments in both these areas.

HP Scalable Network Storage Systems for Life Sciences

Sep 13

Life sciences research today is advancing exponentially, each step bringing us closer to the realization of truly personalized medicine–preventive care and treatments designed specifically for each individual. In the near future, PCPGM healthcare researchers expect to be able to use predictive genetic testing to create custom treatment plans for individuals and deliver dramatic improvements over today’s one-size-fits-all approach. But research capabilities are only part of the equation; current storage and operating capacities must also evolve to accommodate ever-expanding amounts of data before the goal of personalized medicine can be realized.

Step up to the MIQE

Mar 30

Over the years, polymerase chain reaction (PCR) has evolved into a readily automated, high throughput quantitative technology. Real-time quantitative PCR (qPCR) has become the industry standard for the detection and quantification of nucleic acids for multiple application, including quantification of RNA levels. But a lack of consensus among researchers on how to best perform and interpret qPCR experiments presents a major hurdle for advancement of the technology. This problem is exacerbated by insufficient experimental detail in published work, which impedes the ability of others to accurately evaluate or replicate reported results.

Fast Optimization of a Multiplex Influenza Identification Panel Using a Thermal Gradient

Mar 30

The year 2009 was marked by the emergence of a novel influenza A (H1N1) virus that infects humans. There is a need to identify the different strains of influenza virus for purposes of monitoring the H1N1 strain pandemic and for other epidemiological and scientific purposes.

Using the Tecan Genesis Workstation to Automate a Cytometric Bead Array (CBA) Immunoassay

Mar 11

The poster describe the process involved in automating a Cytometric Bead Array (CBA) immunoassay developed to measure relative concentrations of serum antibodies against Tetanus (TT), Sperm Whale Myoglobin (SWM) and Keyhole Limpet Hemocyanin (KLH) in KLH-immunized volunteers.

Ensuring Quality in Assays Performed with Automated Liquid Handlers

Feb 2

The focus of this presentation is to highlight the need of ensuring quality in important assays performed with automated liquid handlers. Nearly all assays performed within a laboratory are volume-dependent. In turn, all concentrations of biological and chemical components in these assays, as well as the associated dilution protocols, are volume-dependent. Because analyte concentration is volume-dependent, an assay’s results might be falsely interpreted if liquid handler variability and inaccuracies are unknown or if the system(s) go unchecked for a long period.

Inkjet System for Protein Crystallography

Feb 1

X-ray crystallography is used routinely by scientists to obtain the three dimensional structure of a biological molecule of interest.Such information can be used to determine how a pharmaceutical interacts with a protein target and what changes might improve functionality. However, the crystallization of macromolecules still remains a serious hindrance in structural determination despite impressive advances in screening methods and technologies.

Attention Deficit & Hyperactivity in a Drosophila Memory Mutant

Attention Deficit & Hyperactivity in a Drosophila Memory Mutant

Nov 9 2009

Action selection is modulated by external stimuli either directly or via memory retrieval. In a constantly changing environment, animals have evolved attention-like processes to effectively filter the incoming sensory stream. These attention-like processes, in turn, are modulated by memory. The neurobiological nature of how attention, action selection and memory are inter-connected is unknown. We describe here new phenotypes of the memory mutant radish in the fruit fly Drosophila.

Editor’s Choice

5 hours ago

Experiences with array-based sequence capture; toward clinical applications.

Dec 10

Although sequencing of a human genome gradually becomes an option, zooming in on the region of interest remains attractive and cost saving. We performed array-based sequence capture using 385K Roche NimbleGen, Inc. arrays to zoom in on the protein-coding and...

Prokariotic Cell Collection in Denmark

Nov 6 2009

I would like to know about a prokariotic cell collection in Denmark. Is there a cell bank in this country? I need a Lactobacillus strain for a fermentation assay and this information about the bank is very helpful for me.

Request for Entries

Oct 16 2009

Ask the Experts is your chance to get the answers to questions on applications, materials, methods, processes, and technologies. Email you question to bst_web@advantagemedia.com, and the editors of Bioscience Technology will find an appropriate expert to answer it. Watch this space in the future to see the questions your colleagues are posting.

STAY INFORMED: SUBSCRIBE TO

Magazine and E-mail Newsletters

Loading...
E-mail:   

MULTIMEDIA

Video:

Viewing SureFocus Slides

Jun 11

A demonstration of SureFocus Microscope Slides in the review of AFB Smears. SureFocus Slides are a patent-pending breakthrough in tuberculosis detection, as their fluorescent staining circle remains visible during review, Fluorescence Microscopy.

Podcasts:

Allen Institute for Brain Research

Allen Institute for Brain Research

Oct 14 2009

Discussed in this interview are both the mouse brain project and the human cortex project with an emphasis on the importance of these projects to neuroscience research.

Information: